Featured Project
Remote Control Caddy
By Gary Sinkowitz
·
Apr 2, 2026
Needed something a little bigger for all the remotes, so created a 5 compartment with staggered heights 3 larger and 2 smaller compartments.
Beginner
6.0 hrs
2 steps
Materials & Tools:
Eryone Black Matte Pla
Easy print, large compartment caddy when you need more storage spece for those remote controls and/or need you phone near you as well
How It's Made
Step 1
— Print The Caddy
Bambu P1P 1
- Download the .3MF,
- load into Bambu Studio,
- Verify your printer is ready (clean plate, verify filament)
- Verify settings in Bambu Studio
- .20 Standard
- Infill 8%, Gyroid
- Eryone Black Matte Pla
Design Files
RemoteCaddySM.3mf
102 KB
·
0 downloads
Step 2
— Print Th eCaddy
Bambu P1P 1
This is a 5.9 hour long print so you need tor eserve the machine for 6 hours.
Make sure you have enough filament loaded
Start the print and monitor it for at least a couple of layers,
Project Stats
40
Views
0
Kudos
2
Steps
Made By
Gary Sinkowitz
CitrusMakerspace Member
License
CC BY-NC-SA
View license
Free to use and adapt with credit. Non-commercial only. Share-alike required.
Share